TRANSFORMER BOARDS – Laminated Pressboard

Figeholm Elboard HDLP and HDLC

HDLP is laminated with polyester resin (dry process). It has the higher mechanical strength of the two materials. Water diffusion and oil impregnation across the laminations is virtually impossible. Processing of large bodies of the material may therefore be facilitated by drilling
diffusion holes through the material. 

HDLC is laminated with casein glue (water-based). The mechanical strength is somewhat lower than for HDLP. The original moisture content of the material as delivered is higher than for HDLP, but diffusion of moisture and oil impregnation is possible (although slow) across the laminations. The material is preferred for certain applications with relatively high dielectric
stress.

Material Properties:

  • Precompressed pressboard is laminated ,even fibre orientation, hard and dimensionally
  • Natural-coloured
  • High purity and mechanical strength
  • Low shrinkage and compressibility
  • Good compatibility with liquid dielectrics
  • Insulation class A (105° C) in accordance with VDE 0530 Part 1

Application

  • As support between the winding and the yoke e.g:
    • Pressure plates
    • Pressure rings
    • General spacer material in the yoke insulation
    • Winding support blocks
  • As support for cleats and leads

Available

  • Available in thickness of 10mm – 120mm
  • Available in widths of 3100 X 2050 or 2000 X 1000mm

Product Description

Code Size
TH1000 10 X 3100 X 2050
TH1204 12 X 1550 X 4100
TH1500 15 X 3100 X 2050
TH1504 15 X 1550 X 4100
TH2000 20 X 3100 X 2050
TH3000 30 X 3100 X 2050
TH4000 40 X 3100 X 2050
TH5000 50 X 3100 X 2050
TH6000 60 X 3100 X 2050
TH6500 65 X 3100 X 2050
TH7000 70 X 3100 X 2050
TH8000 80 X 3100 X 2050
TH9000 90 X 3100 X 2050
TH12000 120 X 3100 X 2050

* Special dimensions on request

Get In Touch

We would love to hear from you! Please fill out this form and we will get in touch with you shortly.
  • This field is for validation purposes and should be left unchanged.

“Copyright © 2016 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, The miracles of science™ and all products denoted with ® or ™ are trademarks or registered trademarks of E. I. du Pont de Nemours and Company or its affiliates”

DISCLAIMER: The technical information contained herein is the result of extensive testing in the manufacturer’s laboratories. In addition any application advice given verbally, in writing or by testing corresponds to the best of our knowledge and belief. Since the use and application of any of our products lies beyond our area of control, it remains the responsibility of the user to verify the product’s suitability for their application.

Back to Top