Polyester Lacing Tape
A strong and compactly woven Polyester Tape
THERMAL RATING: Class B 130°C
APPLICATION: For all Lacing, Tying and Binding applications
|GC461||6 mm x 1000 m long x 0,38 mm thick|
- Related Products
TRANSFORMER PAPER TAPES
Different tape sizes are silt from our various transformer paper types
- Widths of between 6mm to 60mm
- 6mm and 8mm widths are made to order
- 10, 13, 16, and 19mm widths are standard and available as stock items.
- Facilities are available to slit other widths on request
RIV CAMERA SYSTEM
The RIV Camera System Model 752 provides a flexible system for Rotor-in-Place inspections of large generators. It is fitted to the ADWEL Robotic Inspection Vehicle, RIV-702, which can be moved along the stator slots. The camera system includes an integral light. The camera and light are directed at a 45° mirror, which can be remotely rotated through 360° to allow scanning of the stator & rotor as well as looking forward along the air-gap.
The camera can also be focused remotely. The system allows a visual inspection of the generator stator and rotor, including checking the air vents for debris, without removing the rotor. The video output is displayed on a 150mm Colour TFT LCD integral monitor in the control unit. Composite video output is provided for feeding to a second monitor or video recorder.
- Low profile (30mm) allows rotor-in-place testing
- Scans image while conducting wedge tightness or other tests
- High resolution large bright image
- Display video on included monitor and record through video output
- Image can be adjusted for angle and focus
Epoxylite® 006-0838 is a Class H epoxy resin system designed for the Impregnation of both random and form wound machines, and is suitable for use on windings rated up to and including 7kV.
Epoxylite® 006-0838 has excellent tank stability and a relatively short cure cycle. The resins ability to give both good penetration and high film build means that excellent environmental and chemical protection can be obtained with a single application making the resin ideally suited for Electrical Repair Shop use. Epoxylite® 006-0838 has a low inherent viscosity which allows good winding penetration characteristics, however in-built thixotropy, which at low shear gives the resin system a higher viscosity, in combination with the high
reactivity of the system ensures good retention of resin both on and in the winding with low secondary drainage.
Epoxylite® 006-0838 is designed to be applied by a Vacuum Pressure Impregnation process.
Variable VPI processes can be carried out using Epoxylite® 006-0838 e.g.
Random Wound machines: A dry vacuum level of at least 1-2 mbar is recommended for about 15 – 30 minutes before the resin is introduced to the vacuum vessel. The same “wet” vacuum level should be held for 10-15 minutes prior to a pressure of 60-70 psi being applied for 15-30 minutes.
Form wound stators and armatures up to 7 kV: For more demanding applications a Vacuum of 0.5 mbar or better should be employed for a minimum of 60 mins before the resin is introduced into the vacuum vessel.
For a more complete guide to the processing of components and machines in Epoxylite® 006-0838 please refer to the separate processing data sheet for this product.
Containers of Epoxylite® 006-0838 should be stored in a cool place away from direct sunlight or other heat sources.
Maintenance of Resin:
The viscosity and gel-time of Epoxylite® 006-0838 in tanks should be regularly monitored and maintained within the recommended limits.
A Tank Sample Testing service is available from Sterling Technology on request.